How to choose the right solar street light manufacturer?

The solar street light is controlled by the automatic solar street light controller, the solar panel absorbs the solar light and converts it into electrical energy after being irradiated by sunlight. During the daytime, the solar battery charges the battery and at night the battery provides power to the solar led high mast light to realize the lighting function. So what should you consider when choosing a solar street light manufacturer? And how to properly install a solar street lighting system?

Manufacturer qualification

A regular and large solar street light manufacturer must have been established for a long time. If it is a manufacturer that has been always researching and developing solar street lights, it must have obtained many qualifications, so it is very important to check the qualifications of solar street light manufacturers.

Manufacturer factory-scale

If you choose a solar street light manufacturer, you can make a factory audit and see which solar street light manufacturer has a large scale. Generally, the scale of the factory that has been developing solar lamps for many years is not small, and all kinds of supporting facilities are very complete.

Project case

We can find the product quality problems by checking the project cases.

Factory after-sales service

The after-sales service of solar street lights will directly affect the user experience in the later future.

In general, solar street lights have stable voltage, reliable operation, and no potential safety hazards. They are ideal products for ecological communities and road administration departments. The solar street lamp installation is simple, there is no need for wiring or “opening the belly” for digging construction, and there is no concern about power outages.

The precautions for installing solar street lights

With the acceleration of the development of new towns and the rapid development of road energy-saving renovation, the demand for solar street lamps in rural road energy-saving renovation has gradually increased. With the support of government policies, solar street lighting has become an important trend in rural road lighting. So what are the precautions for installing solar street lights?

1. Preparing in advance, carefully check all components according to the loading details of the solar street light manufacturer, check whether they are damaged, bent, distorted, and whether the zinc layer is damaged.

2. When installing, first fix the lamp on the street light pole, then install the solar panel and lithium battery, and finally fix all the parts on the pole and tighten the screws. Before hoisting the solar street light, check whether the standard parts at each position are firm, whether the lamp arm is installed correctly, and whether the light source works normally. Then, check whether the solar lighting system is normal in the simple adjustment system software. Connect the battery and the lamp, the light source will automatically light up; then connect the solar panel, and the light source will automatically turn off.

Check whether the self-test indicator on the automatic solar street light controller is normal. If it is normal, we can start to install the solar light. When hoisting the solar street lamp, pay attention to safety protection; the screws must be absolutely tightened. If there is an error in the viewing angle of the solar panel, you must adjust the orientation of the solar panel area to be completely south.

Put the battery into the waterproof rechargeable solar battery box, and connect the electrode cable to the controller according to the technical standards. Connect the battery first, then the load device, and then the solar panel. During the actual wiring operation, you must pay attention to the wiring and the markings on the control board. The terminal block cannot be wrongly connected, and the positive and negative polarities cannot be collided and connected incorrectly, otherwise, the controller will be destroyed.

3. The solar street light projected area should mainly cover the ground. In order to properly control the brightness of the solar street light, the light distribution control must be given at the top of the light intensity. At the same time, according to the total width of the road surface and the past traffic conditions of motor vehicles and non-motor vehicles, generally speaking, the total width of the road surface of over 20 meters can be considered an asymmetrical layout on both sides. For solar powered high mast lighting, the overlapping layout on both sides can be considered; narrow roads can be arranged on one single side.

Usually, solar street lights must be installed in the intersections, turning lanes, slopes, and other areas of municipal roads, which is conducive to the convenience of non-motorized vehicles and pedestrians. The lighting fixtures on the roads inside and outside the tunnel construction and the connecting roads from the urban street community to the suburban roads should take into account the adaptability of the driver’s eyes to the change of the light source.