Best solutions for explosive zones lighting
The lighting of explosive zones – a special type of lighting that has found its application in many industries: textile, chemical, industries engaged in the extraction and processing of oil, gas, wood processing, and others. The use of flammable substances and mixtures in them creates favorable conditions for explosions and fires. That is why the electrical equipment used in such industries has its own special requirements. These norms are enshrined in various documents.
Considering the class of explosion and fire hazard of the room, it is recommended to use various types of vibration protection lamps that have a specific level of protection for a specific situation. Failure to comply with these requirements or to place lighting equipment in inaccessible areas, which will make it more difficult to control them, can lead to dangerous situations.
Given all of the above, the project lighting in hazardous locations must strictly take into account the specifics of the enterprise, peculiarities of technological processes, and characteristics of combustibles, and really assess the level of risk.
Every self-respecting company will allow itself to incur certain material costs for the purchase of appropriate lighting equipment and complex electrical work because safety is above all. In addition, such an investment is justified in any case, because the cost of lighting will be much lower than the losses that will have to be incurred in the event of an explosion or fire and the elimination of their consequences.
Classification of explosion-proof lighting equipment
The explosion hazard of the zone is determined by the probability of accumulation of gas-vapor-dust-air compounds with the ability to explode when in contact with the ignition source. And the risk of fire is caused, respectively, by the storage and use of various combustible mixtures and substances in it. According to the lighting requirements that allow the use of certain types of equipment for lighting in explosive areas, lamps are divided into 3 classes according to the level of protection from the explosion:
- 2-high reliability equipment, which is guaranteed only in normal operation;
- 1-equipment protected from the explosion during normal operation and in case of some damage;
- 0-absolutely explosion-proof devices with special explosion protection.
Explosion-proof lamps used in explosive areas may have additional types of protection: a waterproof shell, intrinsically safe electrical circuit, oil or quartz filling of the shell, control of the ignition source, protection of the shell from dangerous dust environments, and so on.
All the points listed above guarantee trouble-free operation of light sources in areas, buildings, and premises where a fire or explosion may occur.
Selection of lamps for lighting in hazardous areas
When selecting lighting in explosive areas, it is necessary to take into account that enhanced protection measures (grids, grilles, strong glass) have a bad effect on the determining parameters of the light flux: reduce efficiency, reduce power. To avoid loss of lighting efficiency, you need to carefully choose the appropriate lighting fixtures.
Depending on the class of explosion or fire hazard zone for which the equipment is selected, it must have a certain minimum degree of protection.
For example, rooms of CLASS B-II and B-IIa require installation of lamps with increased reliability, and for zone B-I – with maximum vibration-free.
There is also often a need for portable lighting, usually in hard-to-reach places. Here it is worth remembering that portable lamps in fire-hazardous areas of any class must have a degree of protection of at least IP54; glass caps must be protected by a metal mesh.
Proper selection of lamps, spotlights, and lamps for lighting in explosive areas – a guarantee of complete protection from the occurrence of critical situations.
We offer lamps with gas-discharge lamps; powerful lamps for high rooms(up to 12 meters); linear fluorescent explosion-proof lamps; vibration-free led lamps; explosion-proof floodlights, etc.
Contact us, and our specialists will develop a project for you on individual lighting of explosive zones, taking into account all the norms and your wishes!
Take a look at our luminaires that can be used to illuminate hazardous areas of class 1 and Luminaires for lighting explosive areas of class 2:
With multiple of optic lens design, the Nova-UM series flood light can hit lighting requirements of explosive zones in many different applications
YIBAI LED LIGHTING – a leader in the production of explosive zones lighting fixtures in China, offers services in the installation and design of industrial lighting of hazardous areas. Our specialists with many years of experience will develop a suitable individual project for you.
Choosing us, you will not regret!