What are the characteristics of the professional LED cold storage lamps

LED Lighting fixtures for Food and Beverage Processing

What is a cold storage lamp?

The cold storage lamp is mainly used in places where the ambient temperature is low, the humidity is high, and necessary to pay attention to electricity safety and environmental protection. The cold storage lamp is divided into two parts, one is the protective cover and the other is the light source. The protective cover is mainly made of PP, PC, cast aluminum/glass, aluminum/PC, ABS, and other materials.

Why do you need professional LED cold storage lights?

The common lighting fixture has many defects when used in cold storage, such as high power consumption, low illuminance, short life, and poor sealing, which will lead to air leakage and water freezing in the cold storage lamp. Once a large amount of water accumulates freezing will lead to short circuits and cause food safety hazards. In addition, ordinary lighting is prone to cracking and damage when used in a low-temperature environment.

Before the emergence of professional cold storage lamps, ordinary incandescent lamps, energy-saving lamps, and a moisture-proof lampshade were used for cold storage lighting, or explosion-proof lamps were used instead. Using ordinary incandescent lamps and energy-saving lamps with a moisture-proof lampshade, the frequency of damage in low-temperature cold storage is quite high! Even though there are some large-scale cold storages with a height of more than ten meters that also use incandescent lamps and energy-saving lamps, they are not good enough. Because the brightness is not enough, so ordinary lamps cannot replace professional lamps for cold storage.

LED cold storage lamp solves these problems. YIBAI LED LIGHTING’s high efficiency LED cold storage lamp can be used for a long time in an environment below -50 °C and has a long life. The Diamond series LED cold storage lamp is a typical environmentally friendly, healthy, and promising cold storage lighting source product, and it is one of the preferred light sources at present.

How to choose professional LED cold storage lamps?

The selection of cold storage lamps is usually based on the power of the lamp, the illuminated area, the voltage, the material, the waterproof level, the working environment temperature, the environment humidity, the applicable height, and the cooling method. The common usage scenarios of cold storage lamps are as follows:

  • Air-cooled ceiling cold storage lamp
    Ceiling cold storage lamps are suitable for use in air-cooled cold storage. Generally, small cold storage can be installed with 10-20W. Common shapes are round, oval, rectangle, square, etc.
  • Aluminum row boom cold storage lights
    The boom cold storage light is suitable for the aluminum row storage cold storage lamp. In this type of aluminum row boom, the boom standard is 20cm and can be customized according to the requirements.
  • Ceiling high penetration cold storage lamp
    The transparent cover cold storage lamp has strong penetrating power and is suitable for cold storage with high fog and high humidity, especially medium temperature and low-temperature cold storage.
  • Cold storage lamp in the cold storage production room
    In the production room of the cold storage, the cold storage lamps used for the workbench generally have two types: milky white cover and transparent cover. The milky white cover is not dazzling, but the penetration is not as good as that of the transparent cover. Although the transparent cover cold storage lamp is dazzling, the penetration is very good.
  • Other cold storage lights
    Of course, there are other cold storage lights, such as floodlights, etc. At present, the above 4 kinds are mostly used in the market, and we can choose them according to requirements. But no matter how you choose, the cold storage lamp must be resistant to low temperature, waterproof, dustproof, and explosion-proof, otherwise the service life is very short.

About YIBAI LED LIGHTING

Our company as one of the best NSF certificated high bay lights manufacturers mainly focuses on the Europe & North American market, the main product includes LED high bays, low bays, canopy lights, shoebox lights, wall packs, gas station lights, lamp accessories, and LED modules, etc…as a leader in manufacturing and marketing of LED lighting. For providing a high-quality manufacturing environment and professional lighting assembly, we introduced many SMT automated production lines & advanced equipment and have the ability to do OEM/ODM orders. Please feel free to contact us if you are interested in our products and hope we could cooperate with each other and create a bright future for our business.

For more information about YIBAI LED lighting solutions including IES files, Dialux simulation reports, and technical datasheets, please visit www.yibai.lighting

Contact Us: Guangdong Yibai Optotech Co., Ltd

Tel: +86-13631786201

E-mail: [email protected]

Diamond Series LED high bay light NSF certificate

Diamond Series LED high bay light NSF certificate
Diamond Series LED high bay light NSF certificate
The right lighting solution for the warehouse Diamond LED high bay light
What are the characteristics of the professional LED cold storage lamps
LED Lighting fixtures for Food and Beverage Processing